UTAS-2130

Automatic Asphalt Indentation Penetrometer, EN

UTAS-2134

Spare Indentor Pins (100mm2 and 500 mm2) for UTAS-2130

UTAS-2135

Adjustable mould for the test cube (69mm) for UTAS-2130

UTAS-2136

Metal Intermediate Plate for UTAS-2130

UTAS-2137

Calibration Block for UTAS-2130

UTAS-2138

The appartus for preparing the test cubes for UTAS-2130

UTCM-0926

Cube Mould 70.7 mm, BS, steel, for UTCM-0930 and UTAS-2130

Standards

TS EN 12697-20

UTAS-2130 Automatic Indentation Penetrometer determines the resistance of an asphalt cube and cylindrical specimens to indentation when force is applied to them using a cylindirical pin in a defined period. Maximum nominal size of the aggregates should be less or equal to 16 mm.

UTAS-2130 can apply a 25 N prelaminary force and than 525 N total force without touching the test weights with electromechanical method acc. to TS EN 12697-20.

UTAS-2130 consists of a four-columns frame combined with an assebly for force application and a stainless steel 25L water bath with drain facility, a digital control unit with immersion type heater-agitator, 50 x 0.01 mm displacement transducer with holder, calibration block, interchangeable indentor pin with 100 mm2 and 500 mm2, an adjustable mould 69mm, a metal intermediate plate and a free software.

 Cube mould and the appartus for preparing the test cubes should be ordered seperately.

Key Features

·        Stainless steel

·        Temperature control

·        Digital indicator

·        Ethernet connection

Software

UTAS-2130 is supplied with software developed by Utest that allows automatic capture to PC of test data. Software is capable of showing the test data in real time, storing the results and real time temperature monitoring.

 Technical Specification

Preliminary Force:          (25 ± 1) N

Total Test Force               : (525 ± 1) N

100 mm2 Diameter Indentor Pin:             (11.3 ± 0,1)mm

500 mm2 Diameter Indentor Pin:             (25.2 ± 0,1) mm

Deformation of Apparatus Upon Application and Removal of Forces:     <0.01 mm

Water Tank Capacity:    25 litres

Water Temperature Range:       Ambient to the test temperatures

Water Temperature Stability:    Accuracy of ± 1 °C.

Digital Indicator Resolution:        0.01 mm

Dimensions:      590x1030x480 cm

Weight (approx.):           196 kg